This image was saved by Clonezilla at 2025-06-06 13:53:28 UTC.
Saved by clonezilla-live-3.2.2-5-amd64.
The log during saving:
----------------------------------------------------------
Starting /usr/sbin/ocs-sr at 2025-06-06 13:49:28 UTC...
*****************************************************.
Clonezilla image dir: /home/partimag
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Found /home/partimag is using FAT file system. Set VOL_LIMIT_IN_INTERACTIVE to 4096 MB.
The selected devices: mmcblk0
PS. Next time you can run this command directly:
/usr/sbin/ocs-sr -q2 -c -j2 -z9p -i 4096 -sfsck -senc -p choose savedisk VentureImage_2025-06-06 mmcblk0
*****************************************************.
The selected devices: mmcblk0
Searching for data/swap/extended partition(s)...
The data partition to be saved: mmcblk0p1 mmcblk0p2
The selected devices: mmcblk0p1 mmcblk0p2
The following step is to save the hard disk/partition(s) on this machine as an image:
*****************************************************.
Machine: SBCADLCX4R100
mmcblk0 (62.5GB|Unknown_model|mmc-CUTB42_0x32b75e7e)
mmcblk0p1 (1G|vfat|mmc-CUTB42_0x32b75e7e)
mmcblk0p2 (57.2G|ext4|mmc-CUTB42_0x32b75e7e)
*****************************************************.
-> "/home/partimag/VentureImage_2025-06-06".
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Starting saving /dev/mmcblk0p1 as /home/partimag/VentureImage_2025-06-06/mmcblk0p1.XXX...
/dev/mmcblk0p1 filesystem: vfat.
*****************************************************.
*****************************************************.
Use partclone with zstd to save the image.
Image file will be split with size limit 4096 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Running: partclone.vfat -z 10485760 -N  -L /var/log/clonezilla//partclone.log -c -s /dev/mmcblk0p1 --output - | zstd -c -T0 -3 | split -a 2 -b 4096MB - /home/partimag/VentureImage_2025-06-06/mmcblk0p1.vfat-ptcl-img.zst. 2> /tmp/img_out_err.PIH3WS
Opening User Interface mode.
Partclone v0.3.36 http://partclone.org
Starting to clone device (/dev/mmcblk0p1) to image (-)
Reading Super Block
memory needed: 21246724 bytes
bitmap 275200 bytes, blocks 2*10485760 bytes, checksum 4 bytes
Calculating bitmap... Please wait... 
Total Time: 00:00:01, Ave. Rate:  60.00byte/min, 100.00% completed!
done!
File system:  FAT32
Device size:    1.1 GB = 2201600 Blocks
Space in use:   8.7 MB = 16912 Blocks
Free Space:     1.1 GB = 2184688 Blocks
Block size:   512 Byte
Total block 2201600
Total Time: 00:00:02, Ave. Rate: 259.77MB/min, 100.00% completed!
Syncing... OK!
Partclone successfully cloned the device (/dev/mmcblk0p1) to the image (-)
>>> Time elapsed: 7.40 secs (~ .123 mins)
*****************************************************.
Finished saving /dev/mmcblk0p1 as /home/partimag/VentureImage_2025-06-06/mmcblk0p1.vfat-ptcl-img.zst
*****************************************************.
Starting saving /dev/mmcblk0p2 as /home/partimag/VentureImage_2025-06-06/mmcblk0p2.XXX...
/dev/mmcblk0p2 filesystem: ext4.
*****************************************************.
*****************************************************.
Use partclone with zstd to save the image.
Image file will be split with size limit 4096 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Running: partclone.ext4 -z 10485760 -N  -L /var/log/clonezilla//partclone.log -c -s /dev/mmcblk0p2 --output - | zstd -c -T0 -3 | split -a 2 -b 4096MB - /home/partimag/VentureImage_2025-06-06/mmcblk0p2.ext4-ptcl-img.zst. 2> /tmp/img_out_err.HBkAL7
Opening User Interface mode.
Partclone v0.3.36 http://partclone.org
Starting to clone device (/dev/mmcblk0p2) to image (-)
Reading Super Block
memory needed: 22845540 bytes
bitmap 1874016 bytes, blocks 2*10485760 bytes, checksum 4 bytes
Calculating bitmap... Please wait... 
Total Time: 00:00:01, Ave. Rate:  60.00byte/min, 100.00% completed!
done!
File system:  EXTFS
Device size:   61.4 GB = 14992128 Blocks
Space in use:  11.1 GB = 2702860 Blocks
Free Space:    50.3 GB = 12289268 Blocks
Block size:   4096 Byte
Total block 14992128
Total Time: 00:01:28, Ave. Rate:   7.55GB/min, 100.00% completed!
Syncing... OK!
Partclone successfully cloned the device (/dev/mmcblk0p2) to the image (-)
>>> Time elapsed: 94.01 secs (~ 1.566 mins)
*****************************************************.
Finished saving /dev/mmcblk0p2 as /home/partimag/VentureImage_2025-06-06/mmcblk0p2.ext4-ptcl-img.zst
*****************************************************.
Saving block devices info in /home/partimag/VentureImage_2025-06-06/blkdev.list...
Saving block devices attributes in /home/partimag/VentureImage_2025-06-06/blkid.list...
Checking the integrity of partition table in the disk /dev/mmcblk0... 
Reading the partition table for /dev/mmcblk0...RETVAL=0
*****************************************************.
Saving the primary GPT of mmcblk0 as /home/partimag/VentureImage_2025-06-06/mmcblk0-gpt-1st by dd...
34+0 records in
34+0 records out
17408 bytes (17 kB, 17 KiB) copied, 0.000343133 s, 50.7 MB/s
*****************************************************.
Saving the secondary GPT of mmcblk0 as /home/partimag/VentureImage_2025-06-06/mmcblk0-gpt-2nd by dd...
32+0 records in
32+0 records out
16384 bytes (16 kB, 16 KiB) copied, 0.00103042 s, 15.9 MB/s
*****************************************************.
Saving the GPT of mmcblk0 as /home/partimag/VentureImage_2025-06-06/mmcblk0-gpt.gdisk by gdisk...
The operation has completed successfully.
*****************************************************.
Saving the MBR data for mmcblk0...
1+0 records in
1+0 records out
512 bytes copied, 0.000768639 s, 666 kB/s
End of saveparts job for image /home/partimag/VentureImage_2025-06-06.
*****************************************************.
*****************************************************.
End of savedisk job for image VentureImage_2025-06-06.
Checking if udevd rules have to be restored...
This program is not started by Clonezilla server, so skip notifying it the job is done.
This program is not started by Clonezilla server, so skip notifying it the job is done.
Finished!
Finished!
*****************************************************.
### End of log ###
### Image created time: 2025-0606-1353
